User Tools

Site Tools


start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
start [2019/05/06 11:08]
weilawei [AUGH: ARM User Group Hackathon]
start [2019/05/06 11:09] (current)
weilawei [AUGH: ARM User Group Hackathon]
Line 109: Line 109:
 **__List of All AUGHs__** **__List of All AUGHs__**
  
-  ​**Sunday May 5, 2019 at 1800h UTC**+  ​**Sunday May 5, 2019 at 1800h UTC**
         * Unboxing the SiFive HiFive1 Rev B         * Unboxing the SiFive HiFive1 Rev B
-  ​**Saturday April 13, 2019 at 1800h UTC**+  ​**Saturday April 13, 2019 at 1800h UTC**
         * Building a Miuzei case for the Raspberry Pi 3 B+         * Building a Miuzei case for the Raspberry Pi 3 B+
         * Using an ATmega32 to bitbang JTAG - Part 2: JTAG Signalling and Initialization         * Using an ATmega32 to bitbang JTAG - Part 2: JTAG Signalling and Initialization
-  ​**Saturday April 6, 2019 at 1800h UTC**+  ​**Saturday April 6, 2019 at 1800h UTC**
         * Using an ATmega32 to bitbang JTAG - Part 1: External Interrupt Handling and TCK         * Using an ATmega32 to bitbang JTAG - Part 1: External Interrupt Handling and TCK
-  ​**Saturday March 30, 2019 at 1800h UTC**+  ​**Saturday March 30, 2019 at 1800h UTC**
         * Modifying ribbon cables for logic analyzer snooping         * Modifying ribbon cables for logic analyzer snooping
         * Analyzing and decoding UART and JTAG traffic using Saleae Logic         * Analyzing and decoding UART and JTAG traffic using Saleae Logic
         * Discussion on interpreting eye diagrams         * Discussion on interpreting eye diagrams
-  ​**Saturday, March 23, 2019 at 1800h UTC**+  ​**Saturday, March 23, 2019 at 1800h UTC**
         * Installing SEGGER Embedded Studio, J-Link tools, and the ARM GNU toolchain         * Installing SEGGER Embedded Studio, J-Link tools, and the ARM GNU toolchain
         * Building a binutils and GCC cross-toolchain for aarch64-elf         * Building a binutils and GCC cross-toolchain for aarch64-elf
         * Using raspbootin64,​ raspbootcom,​ and a CP2102 USB-UART adapter to boot bare-metal kernels on the Raspberry Pi 3 B+         * Using raspbootin64,​ raspbootcom,​ and a CP2102 USB-UART adapter to boot bare-metal kernels on the Raspberry Pi 3 B+
-  ​**Saturday, March 2, 2019 at 1800h UTC**+  ​**Saturday, March 2, 2019 at 1800h UTC**
         * The inAUGHural meeting!         * The inAUGHural meeting!
         * Building a Miuzei case for the Raspberry Pi 3 B+         * Building a Miuzei case for the Raspberry Pi 3 B+
start.txt ยท Last modified: 2019/05/06 11:09 by weilawei